A/D Converter
A/D Converter
The thirty-two channel A/D Interface Unit (ADIU, Figure 1) receives up to thrity-two analog channels and outputs the signals to a DT-3010 board in the data acquisition (DAQ) computer.
 Front View | |
 Back View | |
| Figure 1: ADIU-32 | |
The analog signals from the force plates are input via the 15 pin connectors at the back of the ADIU (fig 2). These occupy analog input channels 3-14. Any other analog input can be used via the BNC connections on the back of the unit (input ranges must not exceed ±10 volts). The first two inputs are used to for the Synchronisation Pulses (1) and Event (Trigger) Pulse (2).
For further information on A/D conversions please refer to the A/D Page.
